When specifying the dimensions of the bracket, ensure that the implement is on a flat surface and is in an upright position. This will then determine the distances from the ground of the various fixing points. Some implements will have common dimensions but many will not and the bracket will have to be manufactured to suit the dimensions of each implement. It is critical that the dimensions are measured accurately. The bracket will be manufactured to suit but please also give the diameters of the fixing pins for the upper and lower fixing points. On old implements, the lower fixing points are often horizontal round bars. This needs to be specified and the same special dimensions given as above.

Send mail to robert@hoyler.freeserve.co.uk with questions or comments about this web site.
Last modified: 10/16/05